Tech 21 sansamp rpm ユーザーガイド

SansAmp RPM Specifications

Note: With on-going product development and improvements, specifications and/or

the cosmetic appearance of this unit may change without prior notice. Replacement

parts are available, i.e., knobs, rack handles, faceplate, etc. For more information,

please contact your authorized dealer or Tech 21, Inc.

Model Number:

RPM

Input Impedance-Input 1:

4.7MOhm

Input Impedance-Input 2:

1MOhm

Output Impedance-1/4”:

1KOhm min

Output Impedance-XLR:

600 Ohms min

Input Level-Input 1:

1V RMS max

Input Level-Input 2:

1V RMS or 10V max, with -20dB pad engaged

Output Level-XLR:

Switchable to -20dB or 0dB range

Maximum Output Level:

+10dB or better

Effects Loop Send:

1K Ohm min, -20dB

Effects Loop Return:

100K Ohm min, -20dB

Low Frequency Response:

10Hz or better*

High Frequency Response:

Harmonic content, 20kHz or better*

Maximum Power Consumption:

5 Watts

AC Input Power (factory set):

100V, 117V, 230V, 240V

Cycles:

50/60 Hz

NOTE: Each unit constructed for specific voltages. AC power cannot be switched.

Enclosure:

Aluminum and steel, fully shielded

Dimensions:

19.0"w x 1.75"h x 5.25"d / Overall depth: 6.25"

Weight:

5 lbs.

*Due to the variety of amplifier emulations available, frequency response

characteristics will vary.

OPTIONAL TECH 21 FOOTSWITCH

(Model #FSPL)

Footswitch has LED status indicator, and is powered via the cable,
so no batteries are required. And, unlike most amps which require a
custom multi-pin connector, this Footswitch is engineered to utilize

any

standard 1/4" instrument or speaker cable. You can easily

replace the cable should you lose it, or purchase different cable
lengths to suit your particular needs.

The Footswitch measures 3.5" x 4.5" x 1.25" and is available through
your local authorized dealer or directly through Tech 21.