Aethra d2000 lite ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
If the icon goes red, in spite of all the connections are correct,
click with the right button of the mouse on the icon and select
“Configure” a window, that shows the device information and
configurations will appear. In there, it is possible to change the
serial speed rate (in order to work correctly, the serial speed rate
must be set at 115200 bps).
click with the right button of the mouse on the icon and select
“Configure” a window, that shows the device information and
configurations will appear. In there, it is possible to change the
serial speed rate (in order to work correctly, the serial speed rate
must be set at 115200 bps).
To run a MultiMediaCard formatting:
Press the icon FORMAT to format the CARD
The PC asks for a confirmation to continue the operation. Press ”YES” to confirm or
“NO” to cancel.
“NO” to cancel.
By formatting the MultiMediaCard™, all data contained into the
card will be lost.
card will be lost.
Once formatted, the MultiMediaCard™ is ready to be used.
6.3. Setting Up the MultiMediaCard
In order to setup the MMC2000 option on the device follow the instructions below:
1
Open the TEST MENU page.
The last used setup appears on the screen.
2
Select SETUP & START MONITOR.
or
2
Select the MANUAL TESTS menu and select
BACKGROUND MONITOR test.
3
Enter into the Monitor Test SETUP page.
112
CHAPTER 6 - USING THE MULTIMEDIACARD (MMC2000 OPTION)