Aethra d2000 lite ユーザーズマニュアル
MANUALE D’USO
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
5
To select the B channel to be connected in loop or audio.
In Simulation mode the instrument displays additional information on the channel if
the call-back or call forwarding function is active. See § 3.8.1.
the call-back or call forwarding function is active. See § 3.8.1.
If present, the remote number is shown in the "{[CD]Å, [CB] Æ} [+,++] N" format:
N
Remote number compared to the instrument.
+/++
Type of number: unknown/national+/international++.
Å
N
B channel associated to a call from N.
Æ
N
B channel associated to a call to N.
CD
Indicates a call followed by a call-back upon disconnection
(call-back delayed). Simulation mode only. See § 3.8.2.
(call-back delayed). Simulation mode only. See § 3.8.2.
CB
Indicates a call made as call-back. Simulation mode only.
See § 3.8.2.
See § 3.8.2.
CF
Indicates a call made as cross-loop (call forwarding).
Simulation mode only. See § 3.8.2.
Simulation mode only. See § 3.8.2.
In Basic access, page 2 also displays voltage power level of the phantom power with
related power mode.
related power mode.
7.3. Primary Access status
The third page shows the layer 1 status, with information about synchronization,
alarms and errors for each direction.
alarms and errors for each direction.
3
Scroll to page 3.
CAPITOLO 7. SMART STATUS
121