Aethra d2000 lite ユーザーズマニュアル

ISDN TESTER AND ANALYZER D2000

PRO

/D2000Lite/D2000                                                                                USER’S MANUAL 

 

► 

Make sure that the interface cable is properly connected between the 
instrument and the PC. 

► 

Make sure that the COM port and the rate selected in ISDN software are 
correct. If necessary, change the COM port setting or connect the interface 
cable to another COM port. 

► 

Make sure that the interface cable is properly connected between the 
instrument and the printer. 

► 

Make sure that you are using a crossed cable. 

► 

 Make sure that the baud rate you have selected, matches with the baud rate 
of the printer. If not, select another baud rate. See chapter 10.8: “Changing the 
Baud Rate”. 

 

160

 

        CHAPTER 12 - MAINTAINING THE INSTRUMENT