Aethra d2000 lite ユーザーズマニュアル
USER’S MANUAL ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
To add the SENDING COMPLETE information element, enter '#'
at the end of the number. ISDN only.
at the end of the number. ISDN only.
Sub number: If necessary, enter the subaddress of the called party. ISDN only.
3.4.2. Sending a Call
When you have defined the setup for the call test, continue as follows:
1
Select ‘Use this setup for testing’ in the first SETUP page.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the CALL test.
The LED RUN goes on, the LOOP key appears at the left bottom of the screen and
the START key changes into STOP. Use it to stop the test.
the START key changes into STOP. Use it to stop the test.
The test results appear on the screen.
CHAPTER 3 - PERFORMING A MANUAL TEST
47