Aethra d2000 lite ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
3.12. IP Generate Traffic
Through the test IP GENERATE TRAFFIC, you can simulate a real IP traffic
condition. This allows to carry out a more exhaustive test toward the network, instead
the simple IP PING.
condition. This allows to carry out a more exhaustive test toward the network, instead
the simple IP PING.
The equipment performs a data transfer between hosts by simulating the
functionalities of both. This consent to carry out a test using two devices or one
device and a standard TFTP server.
functionalities of both. This consent to carry out a test using two devices or one
device and a standard TFTP server.
Among the test results provided, a statistic of the throughput reached during the
transfer is displayed. Such statistic is only indicative and it can’t represent the
absolute maximum value available on the network
transfer is displayed. Such statistic is only indicative and it can’t represent the
absolute maximum value available on the network
3.12.1. Setting Up an IP Generate Traffic test
Define the following parameters to perform an IP Generate Traffic test:
Called number: Enter the remote terminal’s ISDN phone number. Only with protocol.
Sub number: If necessary, enter the remote terminal’s ISDN sub number. Only with
protocol.
protocol.
Dest. IP: Enter the IP destination address of the terminal. Only as Client
Transfer type: Select the type of transfer to be simulated
• Download, data is transferred from the remote host to the device. This
allows to simulate a file downloading toward the network. The device asks for
the transfer of a predefined file that must be already present at remote server
site. Problems won’t occur if using as server a second device.
the transfer of a predefined file that must be already present at remote server
site. Problems won’t occur if using as server a second device.
80
CHAPTER 3 - PERFORMING A MANUAL TEST