Aethra d2061 ユーザーガイド

KURZHANDBUCH 

D2061 ADSL TESTER 

 

Select MANUAL TESTS. 

Select NOISE TEST. 

Start the test. 

The tester provides, to each frequency associated to a DMT tone, the RMS noise 
value measured in dBm. 

Enable this feature whenever it is necessary to use the device D2061 as a real 
user’s modem. The tester is in Transparent mode, so all data flow will pass 
through it. D2061 is connected on one side to the ADSL line and on the other end 
to a PC Ethernet 10BaseT port.  

Open the TEST MENU. 

Select Access Mode : ADSL ÅÆ Ethernet. 

Select MANUAL TESTS. 

Activate the ADSL connection, if not already active, through 
the CONNECTION test. 

Configure the values related to ATM (VCI, VPI, LLC SNAP) 
parameters according to the network configuration 
expected. 

Start the test. 

126