Aethra d2061 ユーザーガイド

QUICK GUIDE 

D2061 ADSL TESTER 

 

Line mode (ADSL Annex A): ANSI T1.413, G.DMT ITU-T G.992.1, G.Lite ITU-T 
G992.2, Multimode. 

Line mode (ADSL Annex B): G.DMT ITU-T G.992.1, ETSI DTS/TM, DT U-R2. 

Re-open request: To accept a new opening link request after a disconnection 
event. 

Timeout max (0=OFF): It’s the maximum waiting time before closing an opening  
link request when no answer comes from the DSLAM. 

VPI: Virtual Path Identifier, default value is 8. 

VCI: Virtual Channel Identifier, default value is 35. 

Gain Rx (dB): The user can modify the gain in reception of the device. 

Gain Tx (dB): In this field it is possible to modify the level of the signal transmitted 
by the device. 

Thresholds: Insert measurement thresholds to advise operative data changes. 

Capacity down: Threshold on the line capacity of the downstream connection. 

Margin down: The limit on the downstream noise margin. 

Data Rate down: Set the minimum downstream data rate for the link.  

Action: Action to take in case of the test result is out of threshold limit. 

In order to check ADSL access parameters, carry out this test to start a 
connection and read the values displayed. 

Open the TEST MENU. 

Select ADSL Access, ATU-R mode. 

Select MANUAL TESTS. 

Select CONNECTION. 

16