Aethra d2061 ユーザーズマニュアル
USER’S MANUAL
ADSL TESTER D2061
Value in mV of the impulse both in transmission and reception. S/T only (Pulse).
The instrument measures the values of the signal impulses on
the S/T BUS both in monitor and simulation. The signal is 750
mV
the S/T BUS both in monitor and simulation. The signal is 750
mV
± 10% (referred to the 50Ω test impedance) according to the
ETSI standard. For information on installation (short bus –
extended bus), see ETS 300 012.
extended bus), see ETS 300 012.
6.4. Reading the POTS line status
If the AB2001N option is present and the instrument is
configuring to operate over a normal POTS analog line, you can
display the status of some POTS line parameters.
configuring to operate over a normal POTS analog line, you can
display the status of some POTS line parameters.
1
Display page 1 of the available status information.
6.5. Reading the instrument status
You can view the status of internal batteries or battery recharge at any time.
2
Select page 4 (ISDN).
If powered with batteries, the instrument displays the
battery voltage.
If powered with batteries, the instrument displays the
battery voltage.
CHAPTER 6 - SMART STATUS
87