Aethra d2001 nx ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2001
NX
USER’S MANUAL
1.8.5. Performing a test
To run a test, perform the following preliminary steps:
1
Select the operating mode of the instrument, loading the
desired page with the key.
desired page with the key.
2
Select the type of test from predefined, automatic or
manual tests.
manual tests.
3
Use the COMMON SETUP page to modify the general
configuration parameters of the test
configuration parameters of the test
4
Modify the parameters of the test
5
Connect the instrument to the line according to the
instructions given on the screen
instructions given on the screen
22
CHAPTER 1 - INTRODUCING THE INSTRUMENT