Aethra d2001 nx ユーザーズマニュアル

USER’S MANUAL 

                                          ISDN TESTER AND ANALYZER D2001

NX 

 

To select a manual test:  

Open the TEST MENU. 
The last used setup appears on the screen. 

Select the ACCESS field 

Select the access type e.g. ISDN BASIC or POTS 

Select the ACT AS field 

 

Select the instrument mode, e.g. NT-U 

The lower section of the screen shows the the selected 
network  configuration. The available instrument modes 
are shown in Table 1-1 

Select MANUAL TESTS, the following screen appears 

 

Choose the test that you want to perform.  

Once configured all the parameters regarding the test 
chosen, select °Use this setup for testing°. 

Each test is described in the following pages. 

 

CHAPTER 3 - PERFORMING A MANUAL TEST 

33