Aethra d2001 nx ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2001
NX
USER’S MANUAL
100
Ω termination: Choose if you want to add a 100Ω termination to the S/T socket.
This option can be used if the S/T bus is not terminated correctly. The default value is
NO. Only BRI - S.
NO. Only BRI - S.
For the other parameters, refer to § 3.3 Common SETUP.
5.3. Start monitoring
When you have set the filters, you can start the monitoring test.
Select “Use this setup for monitoring”, connect the instrument as indicated and
1
Start monitoring.
If the previous trace has not been saved, the device asks for a
confirmation to start a new capture session overwriting the data
previously memorized.
confirmation to start a new capture session overwriting the data
previously memorized.
Note that:
The START key changes to STOP.
For “High impedance mode” in ISDN connect the instrument to
any socket in parallel to the S/T BUS.
any socket in parallel to the S/T BUS.
76
CHAPTER 5 - USING THE INSTRUMENT FOR MONITORING