Pyle plcdcs300 ユーザーズマニュアル

7

Stations are searched automatically
from next frequency and detected 
station is stored into the preset 
memory.  In case of LOC state, the 
first Auto Store is done by LOC state
and if 6 CH is not fully memorized, 
the seconds Auto Store search 
continued by Distant state.  At the 
end of Auto Store operation, mode 
is change to Preset Scan.

- Preset Scan

Press AS/PS button (14) shortly in 
radio mode, Preset Scan is started.
This operation starts from next 
preset number and finished at the 
same preset number of which last 
channel memory stored.
Frequency of preset memory is 
displayed with blinking for 5 
seconds.  Press AS/PS button (14) 
again to release this function.

Press and release any one of the 
preset buttons (18) (1 - 6) shortly,
(1 - 6) preset memory is called (Preset
Call).  Press the button for several 
secnds, current frequency is stored 
into preset memory and preset number
(1 - 6) is displayed (Preset Store).

At radio mode, press BAND button 
(13) to select the desired band.
The reception band will change in the 
following order:

- Manual Tune Up/Down

Repeatedly press the 
TUNE/TRACK/SKIP       button (16)
or TUNE/TRACK/SKIP       button 
(17) for manual tuning frequency 
downward or upward.

- Seek Tune Up/Down

Press and hold the 
TUNE/TRACK/SKIP       button (16)
or TUNE/TRACK/SKIP       button 
(17) for several seconds for auto 
tuning frequency downward or 
upward.

Press LOC button (1) shortly to select
between local and distant stations.  
Local setting for reception of strong 
station, and a distant setting for 
reception of weaker stations.  In local 
mode, “LOC” will display.

At FM radio mode, press MO/ST 
button (8) to set the reception between
mono mode and stereo mode.
In stereo mode, when stereo 
broadcasting station is received, the
“      ” indicator will appear upon the 
display.

- Automatic Memory Storing

Press AS/PS button (14) over 1 
second in radio mode, Auto Store is
started.

FM1

FM2

FM3

AM1

AM2