Viewsonic V212 ユーザーガイド

In order to swap batteries without loosing your stored content, follow this procedure. If you do not 
have access to an AC Power source and/or if you do not currently have the AC Power Adapter, 
do the following:

IMPORTANT! The replacement battery should be fully charged.

1. Attach the AC Power Adapter to 

protect changed files from 
power outage.

2. Slide the Battery Latch upward 

into the unlocked position.

3. Slide out the old battery.

4. Slide in the replacement battery.

5. Slide the Battery Latch into the 

locked position.

1. Press the Power button to put the unit in 

Suspend Mode (not shown in 
illustration).

2. Slide the Battery Latch upward into the 

unlock position.

3. Slide out the old battery.

4. Slide in the fully charged replacement 

battery.

5. Slide the Battery Latch into the locked 

position.

IMPORTANT! If the replacement battery is not fully 
charged, be sure to keep the power cable connected until 
the Power LED is Solid Green. If the unit is in Off Mode, 
this will take three (3) to four (4) hours, and will take five 
(5) house if the unit is in On Mode and is being used.