Viewsonic PJ755D ユーザーズマニュアル

           

1 .  To open the OSD menu, press “Menu

” on the Remote Control or Control Panel.

2 . When OSD is displayed, use

keys to select any

item in the main menu.  While making a selection on a par-
ticular page, press

key to enter sub menu.

3 . Use

keys to select the desired item and adjust the

settings by

key.

4 . Select the next item to be adjusted in the sub menu and

adjust as described above.

5 . Press “Menu

” to confirm, and the screen will return to

the main menu.

6 . To exit, press “Menu

” again. If you donít press any key,

the projector will automatically disappear after 30 seconds.
The OSD menu will close and the projector will automati-
cally save the new settings.

Language
Choose the multilingual OSD menu. Use the

or

key to select

your preferred language. 
Press “Menu

” to finalize the selection.

 

Brightness
Adjust the brightness of the image.
 *   Press the

to darken image.

 *   Press the

to lighten the image.

Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
 *   Press the

to decrease the contrast.

 *   Press the

to increase the contrast.

Frequency
“Frequency” changes the display data frequency to match the fre-
quency of your computerís graphic card. If you experience a vertical
flickering bar, use this function to make an adjustment.

Phase
“Phase” synchronizes the signal timing of the display with the graphic
card. If you experience an unstable or flickering image, use this func-
tion to correct it.

Setting

Sub Menu

Main 

Menu

Management

PIP

Language

  Image - I

Image - II

Audio

Contrast

Frequency

Phase

Sharpness

Zoom

Brightness

Contrast

Frequency

Phase

Sharpness

Zoom

Language

Image - I

Management

PIP

Image - II

Audio

Brightness

PIP

Language

  Image - I

Image - II

Audio

Management