Viewsonic G90F ユーザーガイド
ViewSonic G90f/G90fB
8
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
• OSD Lock: Press and hold the [1] button on the face of the monitor for 10 seconds. The
• OSD Lock: Press and hold the [1] button on the face of the monitor for 10 seconds. The
message “OSD LOCK” will then display briefly, indicating that the OSD image settings
are now locked.
• OSD Unlock: Press and hold the [1] button again for 10 seconds. The message “OSD
UNLOCK” will then display briefly, indicating that the OSD image settings are now
unlocked.
Do the following to adjust the display settings:
1. To display the Main Menu, press button [1].
1. To display the Main Menu, press button [1].
M A I N M E N U
(
1
)
E X I T :
S E L E C T :
CONTRAST / BRIGHTNESS
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
1
2
2. To select a setting to be adjusted, press the arrow buttons on the front control panel of
your monitor and scroll through the choices. When the desired control is highlighted,
press button [2].
Note: Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
Display control screen (sample shown in step 3 below). Press button [2] to toggle to the
next control in the pair.
3. To adjust the setting, such as CONTRAST in the sample below, press the arrow buttons.
EXIT : 1
BRIGHTNESS : 2
CONTRAST
4. To save the adjustment and exit the menu press button [1] twice.