Viking Range dfud042 仕様ガイド

installing the designer series or PROFESSIONAL series door panel

(Purchased separately)
The unit comes with everything needed to make installing the door panel easy.

1. Peel the adhesive backing off the washers and place

them in line with the four holes (F) on the metal inner
door of the dishwasher.

2. Loosen the screws (D) on the outer edge of the

dishwasher.

3. Pull the fan exhaust frame (E) down until the lower

edge aligns withthe lower edge of the cabinets and
tighten the screws (D).

NIIN

G!!!! T

e d

orr p

paan

ell m

usstt n

ott o

bssttrru

ucctt tth

ffaan

n e

exxh

haau

usstt vve

ntt..

4. Hook the door panel screws into the keyholes (C) on

the dishwasher door and pull up on the panel.

5. While holding the door panel into position, carefully

open the dishwasher door. Using the stainless steel
screws provided, fasten the door panel into the four
holes (F) on the inner door.

6. Remove the backing from the protective tape and

apply it to the edge of the panel, in front of the
exhaust vent.

7. Raise the exhaust frame (E) to the bottom edge of

the door panel and tighten screws (D) on the side of
the dishwasher.

E:: Door shown is the Designer Series door panel.

installing the full overlay custom door front

(Locally supplied)

The dishwasher can be installed with a
custom door panel that extends from the
kickplate to the countertop. The unit
comes with everything needed to make
installing the door panel easy. The inner
door is pre-drilled for the custom door’s
mounting screws. The custom panel
should be at least 3/4” (1.9 cm) thick.

CUSTOM OVERLAY DIMENSIONS

Width

23 1/2” (59.7 cm)

Height

29 3/4” (75.6 cm)

Thickness

3/4” (1.9 cm)

Weight

Up to 22 lbs. (9.9 kg)

ITEMS PROVIDED WITH THE UNIT
(2) 3/8” (.95 cm) screws (B)
(4) 1 3/4” (4.4 cm) screws (F)

9 3

3//4

4””

((7

5..6

6 ccm

m))

3 1

1//2

2””

((5

9..7

7 ccm

m))