Viking Range dfud042 インストール手順

BASIC ELECTRIC DATA

•6’ (1.8 m) electrical cord supplied with unit
•120VAC/60 Hz
•Water heating element - 1200 watts
•Maximum amps - 15.0

BASIC WATER SUPPLY DATA

•Inlet water temperature-120

F (49

C) minimum at the dishwasher recommended; However, dishwasher will perform

properly with cold water (see 60

F (15

C) columns on cycle data chart)

•Inlet water pressure operating range - 18 to 176 psi (125 to 1,227 kPa)
•PEX tubing with 3/8” (.95 cm) compression fitting supplied with unit.

BASIC DRAIN DATA

•6’6” (2.0m) 3/4” (1.9 cm) ID “crimp-proof” rubber drain hose with clamp attached to dishwasher; can be extended

up to a maximum of 10 feet (3.0m) with 3/4” (1.9 cm) ID copper tubing.

•High loop of drain hose required -

minimum height from floor -

24” (61.0 cm)

maximum height from floor -

35” (88.9 cm)

•Check local codes for air gap requirement in drain line.

ALL ELECTRICAL AND PLUMBING CONNECTIONS MUST CONFORM TO LOCAL CODES.

CYCLE DATA

DFUD042 AND DFUD142

DESCRIPTION

WATER TEMP.

PRE-WASH

MAIN WASH

RINSE

Pots/Pans

140

F or 170

(60

C or 75

Heavy

130

F or 160

(55

C or 70

Normal

130

F or 150

1 or 2

(55

C or 65

Light/China

105

F or 120

(40

C or 50

Quick

F or 120

(30

C or 50

Rinse/Hold

A. Using the lower water temperature setting.
B. Using the higher water temperature setting.
NOTE: Includes time for dry

Express option avaliable for Pots/Pans, Heavy, Normal, and Light/China cycles on DFUD142 model only.
Reduces washing time and temperature (not available on Quick wash or Rinse/Hold)

Total Wash Time - Minutes
Input Water

Input Water

F (10

120