Viewsonic cde6501led ユーザーガイド

ページ / 61
34
35
Other Information 
Troubleshooting
If, after reading these operating instructions, you have additional questions related to 
the use of your Display, please call the services center in your local area.
Before calling service, please check the symptoms and follow suggested solutions.
Remote Control
Problem
Possible Solution
Remote control does not operate  
• The batteries could be weak. Replace the batteries.
• Check the orientation of the batteries.
• Make sure the power cord is plugged in.
Video and Audio
Problem
Possible Solution
No picture (screen not lit),
No sound
• Make sure the power cord is plugged in.
• Press POWER on the Display or on the remote 
control.
Dark, poor or no picture (Screen lit), 
good sound
• Select a proper picture mode.
• Adjust the brightness in the video setting.
No color/dark picture/abnormal color • Adjust the color saturation in the video setting.
Good picture, no sound
• The sound may be muted. Press MUTE again to 
cancel.
Audio noise.
• Communication problems may occur if infrared 
communication equipment (e.g., infrared cordless 
headphones) is used near the Display. Move the 
infrared communication equipment away from the 
Display until the noise is eliminated
General
Problem
Possible Solution
Lost password
• You may use the super password (2580).
Some items can’t be accessed
• If a setting option appears in gray, this indicates that 
the settings option is unavailable in current input 
mode.
Cabinet creaks
• When the Display is in use, there is a natural rise 
in temperature, causing the cabinet to expand 
or contract and may be accompanied by a slight 
creaking noise. This is not a malfunction.
Remote control command is not effect 
in some cases.
• During the timing of USB device detection (i.e. when 
the Display is turned on with USB device connected, 
or when you plug in USB device during Display 
working),the Display may not act by remote control 
buttons in such case. Wait some time, then it is OK.
Control buttons do not operate
• Disconnect the power cord and wait for a few 
seconds. Then re-plug the power cord and turn on 
the Display again
Note: If your problem is not solved, turn your Display off and then on again.
Cautions: Never attempt to repair a defective Display yourself.