Viewsonic n2700w ユーザーガイド
ViewSonic English- 7 N2700w
English
3 Connect VXP adapter to RF
Cable & Antenna
4 Connect AV
To play a video form DVD or VCR, you must connect the correct output ports to the correct input
ports on the VXP adapter.
4.1 Composite video source: Connect with Video-in and R-audio in- L ports. Or connect the
ports on the VXP adapter.
4.1 Composite video source: Connect with Video-in and R-audio in- L ports. Or connect the
audio-in line with R and L audio-in.
4.2 YPbPr video source: please connect with Y, Pb and Pr Video-in and audio-line in (3.5mm
stereo jack) ports.
(NOTE: If Desired, the RCA L /R Jacks may be used as an audio input corresponding to the
YPbPr input; however a change on the OSD is required. See page
(NOTE: If Desired, the RCA L /R Jacks may be used as an audio input corresponding to the
YPbPr input; however a change on the OSD is required. See page
39
)
4.3 S-video input. SVIDEO is only available on the optional VXP10 module. Contact ViewSonic at
for ordering information.
NOTE: “AUDIO IN” Jack requires (optional) Stereo Mini to RCA adapter. If desired, the “R-Audio
In-L” (RCA) jacks may be used instead.
Component video
IN ports
IN ports
Y
Pb
Video in
R-audio in-L
Audio in
Pr
HD receiver/ DVD player
DVD or VCR Player