Vidikron model 100t ユーザーズマニュアル
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
43
Resolution: The Vision 90t/100t defaults to an output resolution of 720p. When using the
Vision 90t/100t with a computer or certain HD sources, you may want to force it to use a
different output resolution. If so, select Resolution from the Service menu and choose one.
Then, press ENTER to confirm.
Vision 90t/100t with a computer or certain HD sources, you may want to force it to use a
different output resolution. If so, select Resolution from the Service menu and choose one.
Then, press ENTER to confirm.
System Reset: To reset ALL projector and controller settings (including image settings) back
to their factory defaults, choose System Reset from the Service menu.
to their factory defaults, choose System Reset from the Service menu.
A confirmation message appears, reminding you to save your settings before you perform
the reset, so that you can restore them afterwards. If you have done this, select Confirm to
continue with the reset. Otherwise, click Back to cancel.
the reset, so that you can restore them afterwards. If you have done this, select Confirm to
continue with the reset. Otherwise, click Back to cancel.
Restore Saved Settings: Following a System Reset, select Restore Saved Settings to apply all
previously-saved settings to the projector.
previously-saved settings to the projector.
This action is not undoable. Proceed with caution! Before you perform a
System Reset, save ALL settings, including “Custom” ISF Presets (page 37), ISF
Day/Night presets (page 39), Output Shift settings (page 39), Input Names
(page 40) and Trigger settings (page 42).
System Reset, save ALL settings, including “Custom” ISF Presets (page 37), ISF
Day/Night presets (page 39), Output Shift settings (page 39), Input Names
(page 40) and Trigger settings (page 42).
Caution