Viking Range ddbb536lss インストール手順
3/4”
(1.9 cm)
End panel
1”
(2.5 cm)
1/4”
(0.6 cm)
Z-Bracket
21
-3/
4”
(55
.2
cm
)
21
-3/
4”
(55
.2
cm
)
24
”
(61
.0
cm
)
Optional kickplate notch
(Dimensions determined by cabinets)
24
”
(61
.0
cm
)
82-7
/8”
(210
.5 c
m) m
in.
to
84-1
/16
”
(213
.5 c
m) m
ax.*
82-7
/8”
(210
.5 c
m) m
in.
to
84-1
/16
”
(213
.5 c
m) m
ax.*
Custom Side Panel Dimensions
49
48
*Note: Depending on how high leveling feet are raised, and cabinet enclosure height.
Custom Panel General Information
Custom finishing options
• All installations must allow for the refrigerator
and freezer door to open a minimum of 90˚.
• For side wall or corner installation, allow for a
standard 3” (7.6 cm) cabinet filler to assure
door(s) opens 90˚.
door(s) opens 90˚.
Note: If a custom handle is used, a wider filler
may be necessary.
may be necessary.
• Panel thickness must not exceed 1” (2.5 cm)
on hinge side. Thicker panels will interfere with
door swing and clearance.
door swing and clearance.
• A 1/4” wood filler or insulation filler must be
used between the door and 3/4” wood panel
to prevent condensation from forming.
to prevent condensation from forming.
Ice and Water Dispenser Bezel Removal
(if required)
Note: Designer model shown.
Remove packaging material surrounding bezel.
Grasping the sliding lever, pull away from bezel.
Remove spill tray from lower part
of bezel exposing 2 screws.
Remove screws.
1
2
4
3
Note: Adding 3/4”
(1.9 cm) side panels adds
an additional 3/4” (1.9 cm)
to the overall width of
the product for each
side panel used.
(1.9 cm) side panels adds
an additional 3/4” (1.9 cm)
to the overall width of
the product for each
side panel used.
Note: Requires side panel
hardware kit (SPHKDS).
hardware kit (SPHKDS).