Viking Range ddbb536lss インストール手順

Verify Operations

Control Panels

1. Press “Activate Controls” pad
2. Verify unit is not in Sabbath Mode

If in Sabbath Mode:
A. The Sabbath Mode will disable the interior lights, display (except 3 blue squares) and alarm.

(See picture below for visual indication of Sabbath Mode)

To exit the Sabbath Mode:
B. Press & Hold “Activate Controls” and then “Display Off” for 3 seconds.

(The control will beep 3 times to alert the user the Sabbath Mode has been exited)

3. Verify unit is not in Showroom Mode

If in Showroom Mode:
A. The Showroom Mode will disable the refrigerator system but all other functions are normal.

These include lights and control. (See picture below for visual indication of Showroom Mode)

To exit Showroom Mode:
B. Press & Hold “Activate Controls”; while holding, press and hold “Higher Temp” and “Alarm Off”

together. (The control will beep 3 times to alert the user that Showroom Mode has been exited)

4. Press “Alarm Off” & “Display Off” at the same time and hold until beeps (force start compressor).
5. All models need to be set at the 5th bar for Refrigerator & Freezer – factory setting.

Bottom-Mount

Side-by-Side

Control Panels

1. Press “Activate Controls” pad
2. Verify unit is not in Sabbath Mode

If in Sabbath Mode:
A. The Sabbath Mode will disable the interior lights, display (except 3 blue squares) and alarm. (See

picture below for visual indication of Sabbath Mode)