Viking Range ddbb536lss インストール手順
47
46
Replace top air grille.
Using an 8” magnetic nut driver, replace
the two 1/4” screws.
(Professional) Replace the center grille louver.
(Designer) Replace the center grille louver.
Open door. Display should flash.
Press “ACTIVATE CONTROLS” pad and close door.
NOTE: There is a 6 minute delay before the unit starts.
28
29
30a
30b
31
32
Final Installation
Performance Checklist
h
Verify cabinet size.
h
Verify electrical supply and water supply
(if applicable).
(if applicable).
h
Install anti-tip device(s) and verify unit is
secure.
secure.
h
Position unit in cutout, level at desired
height and secure unit.
height and secure unit.
h
Plug-in unit and verify operation.
h
Connect water supply (if applicable).
• Verify icemaker fill tube is properly
inserted.
• Verify icemaker bail arm is down.
• Verify dispenser operation
• Verify dispenser operation
(if applicable).
h
Align/square door(s).
h
Verify drain pan is properly installed and
no leaks on water connection.
no leaks on water connection.
h
Install kickplate.
h
Remove internal packaging and labels
and wipe unit down.
and wipe unit down.
Installer’s information:
Installer’s name:
_____________________________
Installer’s company:
_________________________
Date:
________________________________________