Vinotemp wm-1500htd インストール手順
- 3 -
• If top exhaust, cut a rectangular opening at the top of the cabinet to the
length and width of the top exhaust openings (see Fig. 2.2).
• Mount the gaskets on the four rear mounting sides.
• If top exhaust, place the gaskets along the top openings at the top of the
cooling unit. (See Fig. 2.3)
• Place the cooling unit to a flat and stable place.
• Then move it on the top of the rack temporally.
• Move the cooling unit towards the mounting sides and push to press the
gasket.
• Locate the 2 brackets (6) and use 7/16” wrench to tighten the 2 screws (7).
• If top exhaust, install the top exhaust grille at the top of the cabinet with
the arrow towards the front and facing down the cabinet.
• Plug the cooling unit in receptacle.
• Screw the 2 screws (4) and locate the light on the ceiling.
• Plug the light in receptacle.
• Plug the wine cellar.
3. Electrical Cord
• Because of potential safety hazards under a certain condition, we strongly
recommend against the use of an extension cord. However, if you still
elect to use an extension cord, it is absolutely necessary that it will be a
UL LISTED 3-wire grounding type appliance extension cord having a 3-
blade grounding plug and a 3-slot receptacle that will plug into the
appliance. The marked rating of the extension cord should be 115 V, 15 A.
elect to use an extension cord, it is absolutely necessary that it will be a
UL LISTED 3-wire grounding type appliance extension cord having a 3-
blade grounding plug and a 3-slot receptacle that will plug into the
appliance. The marked rating of the extension cord should be 115 V, 15 A.