VTech LS6325-3 ユーザーガイド

Your telephone base is ready for tabletop use. If you want to mount your 

telephone on a wall, use the provided wall mount bracket to connect with  

a standard dual-stud telephone wall mounting plate. If you do not have   

this mounting plate, you can purchase one from many hardware or  

consumer electronics retailers. You may need a professional to install the 

mounting plate.

Plug one end of the telephone line cord into the

 TeL LINe jack on the 

bottom of the telephone base. Plug the small end of the power adapter  

into the 

POWer jack on the bottom of the telephone base.

Position the telephone base as shown below. Insert the extended tabs [B] of 

the wall mount bracket into the slots [A] on the back of the telephone base. 

Push the telephone base down until it clicks securely in place.
Route the telephone line cord through the wall mount bracket hole and plug 

it into the telephone wall jack. Route the power cord out of the bottom of the 

telephone and plug it into an electrical outlet not controlled by a wall switch.
Align the holes on the bracket with the standard wall plate and slide the 

bracket down until it locks securely. Bundle the telephone line cord and 

power adapter cord neatly with twist ties.

1.

2.

3.

4.

2

4

[A]

[A]

[B]

[B]

3

1

5