VIZIO VHT510 ユーザーガイド

VIZIO VHT510 User Manual 

Version 5/25/2010 

17 

 

www.VIZIO.com 

  Make sure that the power cables are removed from the back of your Sound Bar or Sub-Woofer 

before cleaning. 

  Do not use volatile solvent (such as toluene, rosin and alcohol) to clean your Sound Bar or Sub-

Woofer. Such chemicals may damage your Sound Bar or Sub-Woofer housing. 

  Use a soft cloth for cleaning. 
  If the housing is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to 

clean the display.  Wring water out of the cloth before cleaning to prevent water from penetrating 
into the housing. Wipe the housing with a dry cloth after cleaning. 

Your Sound Bar operates in unison with the Wireless Subwoofer and they come paired from the factory. 
Follow the procedure below if pairing is needed: 

1.  Connect cables to your Sound Bar (see Connecting Equipment on page 15 for detailed 

steps). 

2.  Connect the power adapter to the back of your Sound Bar and the power cord to the back of 

the subwoofer and then plug them into a wall outlet. 

3.  Turn on your Sound Bar and subwoofer. 
4.  Pair and link the subwoofer to your Sound Bar, following the steps in the table below: 

a.  First pair the subwoofer and your Sound Bar. 
b.  Then, link the subwoofer to your Sound Bar (select your Sound Bar as the source of 

audio). 

Press for 

more than 5 

seconds 

Starts flashing 

slowly (after 

flashing fast) 

Subwoofer starts 

pairing mode 

Press INPUT for 

more than 3 

seconds 

Link 

LED 

flashes 

fast 

Sound Bar 

is in pairing 

mode 

Press and 

hold for 1 to 

3 seconds 

Begins flashing 

fast 

Subwoofer selects 

Sound Bar as  

audio source 

N/A N/A 

N/A