VIZIO d1 ユーザーガイド
BRAVO D1 User Guide
Page 11
.
VINC.COM
TV System Setup
Either a PAL or NTSC signal can be selected for the Bravo D1 output. Select the TV output option
that matches the requirements of your TV
If your TV is NOT a multi-system version the following symptoms may indicate that the incorrect
output setting has been selected for the Bravo D1:
that matches the requirements of your TV
If your TV is NOT a multi-system version the following symptoms may indicate that the incorrect
output setting has been selected for the Bravo D1:
Picture is distorted.
Picture is black and white only.
Picture is not full screen, or part of the border is not visible.
To correct the above problem, change the Bravo D1’s TV output setting
to PAL or NTSC using the Remote Control as follows:
to PAL or NTSC using the Remote Control as follows:
1. Press the Setup button.
2. Press the d button to navigate to the Video setting.
3. Press the Enter button to reveal this screen.
2. Press the d button to navigate to the Video setting.
3. Press the Enter button to reveal this screen.
4. Press the d button to highlight TV OUT.
5. Press the f button to highlight the TV system submenu.
6. Press the d button to highlight the system and output type for your TV.
7. Press the ENTER button to confirm the selection.
8. Press the SETUP button to exit the setup menu.
5. Press the f button to highlight the TV system submenu.
6. Press the d button to highlight the system and output type for your TV.
7. Press the ENTER button to confirm the selection.
8. Press the SETUP button to exit the setup menu.
When setting the TV system to PAL or NTSC output, set the HD component/DVI outputs to Off.