VIZIO E3D420VX ユーザーズマニュアル
20
5
E3D320VX / E3D420VX / E3D470VX
To connect to a wireless network whose network name (SSID) is not being
broadcast:
broadcast:
1. Press the
MENU button on the remote.
The on-screen menu is displayed.
2. Use the
Arrow buttons on the remote
to highlight the
Network icon and
press
OK. The Network Connection
menu is displayed.
3. Highlight
Enter Access Point Name
and press
OK.
4. Using the
QWERTY Keypad on the
remote, enter your network’s name
(SSID), then highlight
(SSID), then highlight
Connect and
press
OK. (If you would like to use the
on-screen keyboard instead, highlight
Show Keyboard and press OK.)
Show Keyboard and press OK.)
5. Using the
QWERTY Keypad on
the remote, enter your network’s
password, then highlight
password, then highlight
Connect and
press
OK. (If you would like to use the
on-screen keyboard instead, highlight
Show Keyboard and press OK.)
Show Keyboard and press OK.)
6. Press the
EXIT button on the remote.
Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the Manual Setup
feature.
Advanced users can fine-tune the network settings using the Manual Setup
feature.
To change advanced network settings:
1. From the Network Connection menu,
highlight
Manual Setup and press
OK. The Change Settings menu is
displayed.
displayed.
2. Use the
Arrow and OK buttons to
adjust each setting:
• DHCP - (Dynamic Host
• DHCP - (Dynamic Host
Configuration Protocol) This setting
must be turned Off to change any
of the other settings.
must be turned Off to change any
of the other settings.
• IP Address - The IP address
assigned to the TV.
• Subnet Mask - The subnet mask.
• Default Gateway - Your network’s
• Default Gateway - Your network’s
default gateway address.
• Pref. DNS Server - Your preferred
domain name server address.
• Alt DNS Server - Your alternate domain name server address.
3. If you need the RJ45 (ethernet) MAC address or the Wireless MAC address
to set up your network, these are displayed at the bottom of the Change
Settings menu.
Settings menu.
4. Press the
EXIT button on the remote.
Testing Your Network Connection
To test your network connection:
To test your network connection:
1. From the Network Connection menu, highlight
Test Connection and press
OK.
2. The Test Connection screen displays the connection method, network
name, signal strength, and download speed of your network connection.
3. Press the
EXIT button on the remote.