VIZIO VW22L ユーザーガイド
VIZIO
®
VW22L HDTV10T User Manual
Version 7/14/2008
26
www.VIZIO.com
Chapter 3 Setting Up to Watch Television
3.1 Basic LCD HDTV Start Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.
power cord into an AC wall socket.
2. Connect Audio and Video Cables to the HDTV
3. Turning Power On
Once all the components are connected, press the Power ON button on the side of the HDTV, or
press the Power ON button on the remote control.
press the Power ON button on the remote control.
4. Select Input Source
Select the Input Source for the HDTV by pressing the INPUT button on the side of the TV or
using the Input button on the remote control. Pressing this button will cycle you through the
following options: TV, Composite, S-Video, Component, VGA, HDMI.
using the Input button on the remote control. Pressing this button will cycle you through the
following options: TV, Composite, S-Video, Component, VGA, HDMI.
5. Using DTV and TV with an Antenna or Cable
At first power on, the HDTV will have the DTV/TV input selected and will guide through some
setup screens. If it is not the first time the HDTV has been powered on, you will need to select
TV using the INPUT button on the remote control or the side of the HDTV, or directly by pressing
the TV button on the remote control, and Auto Scan for the available TV channels.
setup screens. If it is not the first time the HDTV has been powered on, you will need to select
TV using the INPUT button on the remote control or the side of the HDTV, or directly by pressing
the TV button on the remote control, and Auto Scan for the available TV channels.
a. Press Menu on the remote or the side of the
HDTV to bring up the On Screen Display (OSD).
b. Select the SETUP option and press the right
arrow button on the remote control to enter the
SETUP menu.
SETUP menu.
c. Highlight the AUTO CH SEARCH option and
press right arrow button on the remote to begin
search. Note: You can press EXIT to stop the
channel search.
search. Note: You can press EXIT to stop the
channel search.
d. It is also possible to manually add or delete
channels from the channel list after using the Auto CH Search. Highlight the Manual
Channel Set option and press the right arrow button on the remote to open the Manual
Channel Set Menu. Press the up and down buttons on the remote control to select the
channel and press the OK button to toggle between Viewable and Not Viewable
selections.
Channel Set option and press the right arrow button on the remote to open the Manual
Channel Set Menu. Press the up and down buttons on the remote control to select the
channel and press the OK button to toggle between Viewable and Not Viewable
selections.
e. Press the Exit button on the remote control to close the OSD and begin watching TV.
about availability in your area, type of antenna and in which direction to point your antenna. The channel
availability through cable depends upon which channels your cable operator supplies in Clear QAM;
consult your cable operator for more information.
availability through cable depends upon which channels your cable operator supplies in Clear QAM;
consult your cable operator for more information.