Voxson gps350 ユーザーガイド

Congratulations on purchasing your new Voxson GPS Navigation System.    The following manual will 

demonstrate how to install and use your GPS device as well as detail the operation, functions, and features 
of the Destinator navigation software. 

Please note that the GPS must be mounted in the vehicle such that is does not interfere with the driver’s 

view or operation of the vehicle’s controls.    The device must also not be mounted in the deployment 

area of the vehicle’s airbags (if fitted). 

1. To assemble your car holder kit, first attach the cradle to the suction-mount gooseneck bracket. To 

complete this start by orienting the bracket such that the lever at the base is facing upwards.    Place 
the cradle onto the bracket ensuring that the tabs on the bracket align with the holes in the cradle 

(A). Slide the cradle downwards (B) until a loud “click” is heard. 

 

 

 

2. Place the car holder kit in a suitable location on your windscreen 

ensuring that the lever at the base of the bracket is switched 

such that it is away from the glass.    The area of the windscreen 

where the bracket is to be mounted should be cleaned with an 
alcohol based cleaner prior to attaching the bracket.    The best 

location for the device is usually in the centre of the vehicle at 

the bottom of the windscreen. 

3. Whilst firmly pressing the bracket against the glass, push the 

lever back into place against the base of the bracket.    Once 
fitted, pull gently on the bracket to check that the suction 

mount is secure.   

CAUTION: Do not place any force on the cradle itself as it can 

be easily broken.