JVC GZ-HD10 ユーザーガイド
27
EN
Menus
Settings: [ ] = Factory-preset
<
APERTURE PRIORITY
You can add a blurring effect to
the background by setting the
aperture value (F-number).
*
the background by setting the
aperture value (F-number).
*
#
mode only
@ [AUTO] : The aperture value is adjusted automatically.
F1.9 to F4.0 : The lower the F-number (larger aperture value),
F1.9 to F4.0 : The lower the F-number (larger aperture value),
the more blurred the background will become. The higher
the F-number (smaller aperture value), the clearer the
focus will be for both near and far objects. Move the set
lever to
the F-number (smaller aperture value), the clearer the
focus will be for both near and far objects. Move the set
lever to
¡ / ¢ to set the value.
NOTE
If the image is too bright, set to a larger F-number. If the image is
too dark, set to a smaller F-number.
too dark, set to a smaller F-number.
=
WB
Adjusts the white balance to
achieve the optimum colors
for the amount of light in your
surroundings during recording.
achieve the optimum colors
for the amount of light in your
surroundings during recording.
@ [AUTO] : White balance is adjusted automatically.
B
MWB : Adjusts the white balance manually depending on
the light source.
1) Hold a sheet of plain white paper in front of
the subject so that the white paper fi lls the
screen.
screen.
2) Press and hold the set lever until the
B
indicator starts blinking then stops blinking.
D FINE : When shooting outdoors on a sunny day.
E CLOUD : When shooting outdoors on a cloudy day.
F HALOGEN : When a video light or similar type of lighting is
E CLOUD : When shooting outdoors on a cloudy day.
F HALOGEN : When a video light or similar type of lighting is
used.
w
EFFECT
Enables you to record videos or
still images with special effects.
still images with special effects.
1
[OFF] : No effect is used.
J
SEPIA : The image has a brownish tint like old photos.
K
MONOTONE : The image becomes black and white like old
movies.
L
CLASSIC FILM* : This effect skips frames to give images of
an old movie atmosphere.
M
STROBE* : The image looks like a series of consecutive
snapshots.
t
TELE MACRO
Enables you to shoot a
subject as large as possible
at a distance of approx. 70 cm
(2.30 ft).
subject as large as possible
at a distance of approx. 70 cm
(2.30 ft).
1 [OFF] : Deactivates the function.
0 ON : Activates the function.
0 ON : Activates the function.
>
ZEBRA*
The sections of the
photographic subject that
are refl ected as white due to
light are displayed in a striped
pattern. Use this as a guide for
adjusting the brightness.
*
photographic subject that
are refl ected as white due to
light are displayed in a striped
pattern. Use this as a guide for
adjusting the brightness.
*
! mode only
1
[OFF] : Deactivate this function.
70% : Sections that are close to being refl ected as white (bright)
are displayed in a striped pattern.
100% : Sections that are completely refl ected as white (too
bright) are displayed in a striped pattern.
^
SHARPNESS*
Adjusts the enhancement level
of the outline of the recorded
image.
*
of the outline of the recorded
image.
*
! mode only
Adjust the sharpness moving the set lever to
£ / ¤ , then press
down.
NOTE
Enhancing the sharpness causes the recorded image to appear
grainy.
grainy.