JVC GR-AXM250 取り扱いマニュアル

To record a scene for 5 seconds, providing quick
scene transitions like those seen in TV
programmes.
1) Make sure the recording mode is set to “SP”.
2) During Record–Standby, press 5SEC. REC 

2

.

 5S 

d

 appears and 5Sec. Rec is reserved.

3) Press the Recording Start/Stop Button 

9

.

Recording starts, and after 5-second recording
is finished, the camcorder re-enters the Record–
Standby mode automatically.

4) To cancel the 5Sec. Rec. function, press 5SEC.

REC 

2

 again so that 

 5S 

d

 disappears.

• Fade/Wipe (

 pg. 23) cannot be activated by

pressing 5SEC. REC 

2

.

To quickly increase the brightness of the subject
relative to the background.
1) Press BACK LIGHT 

e

 during recording. “

” is

displayed and the subject is brightened.

2) To cancel Backlight Compensation, press BACK

LIGHT 

e

 again. “

” disappears and the

brightness returns to the previous level.

• Backlight Compensation functions in both

recording modes (“

” or “

”).

• Using BACK LIGHT 

e

 may make the subject too

bright, resulting in a washed out or white image.

• BACK LIGHT 

e

 cannot be used when the

manual Exposure Control mode (

 pg. 18) is

engaged.

If correct focus cannot be obtained with Auto
Focus, use Manual Focus.
1) Set the Power Switch 

!

 to “

” while pressing

down the Lock Button 

0

 located on the switch.

2) Press 

 FOCUS 

4

. “

” appears.

3) To focus on a distant subject, rotate the MENU

Wheel 

1

 upward. “

” appears and blinks.

To focus on a close subject, rotate the MENU
Wheel 

1

 downward. “

” appears and blinks.

4) To cancel the Manual Focus, press 

 FOCUS

4

. “

” disappears and the Auto Focus is

applied.

• When the focus level cannot be adjusted any

farther or closer, “

” or “

” will blink.

GR-AXM250UC

3/11/03, 10:24 AM

12