JVC GR-DF470 取り扱いマニュアル

ページ / 84
Master Page: Right
— 13 —
Connect the USB cable to copy still image or video clip files in a memory card to the PC.
1
To assure safety, make sure all 
units are turned off before 
making any connections.
2
Use the USB cable to connect 
the camcorder to the PC.
NOTES:
● It is recommended to use the AC 
Adapter as the power supply instead 
of the battery pack.
● When the USB cable is connected, 
turning on or off the camcorder or 
switching the VIDEO/MEMORY (DSC) 
mode on the camcorder causes 
malfunctions of the PC.
● If you connect the camcorder to the PC 
through a USB hub, compatibility issues 
between the hub and the PC may result in 
instability in the operation of the PC. If this 
happens, connect the camcorder directly 
to the PC, not through the hub.
● Do not use an extension USB cable.
1
Make sure that there is a 
memory card in the camcorder.
2
Set the camcorder’s VIDEO/
MEMORY Switch to “MEMORY”.
3
Set the camcorder’s Power 
Switch to “PLAY” while 
pressing down the Lock Button 
located on the switch.
4
Connect the camcorder to the 
PC with a USB cable. (See 
above)
On the camcorder’s LCD monitor 
[USB] appears. The memory card icon 
appears on the desktop.
● The name of the memory 
card icon is “Untitled”, 
“Unlabeled” or “No name”. 
We recommend that you 
name the icon to tell it from the other 
removable disks or folders.
5
Double-click the memory card 
icon on the desktop.
Connections (Macintosh)
PC
USB cable
Camcorder
To USB 
connector
To USB
connector
Viewing the Contents of a 
Memory Card (Macintosh)
CONTINUED ON NEXT PAGE
M5D2+DSC_InstaGuide.fm  Page 13  Wednesday, October 27, 2004  4:30 PM