Cisco 4 Port PA-4T+ データシート
製品コード
PA-4T+
Specifications
Ordering information
PA-4T+ for all electrical interfaces (5-in-1)
Requires IOS Release 11.1.8CA (and above) or 11.2.5P (and above)
Operator indicators LEDs (5 per channel for a total of 20 LEDs per Port Adapter)
DTE or DCE function
Transmit Data
Transmit Clock
Receive Data
Receive Clock
Enable (1 per Port Adapter to indicate enabled hardware)
Network interfaces
Four full-duplex ports at T1 (1.55 Mbps) or E1 (2.048 Mbps)
Two full-duplex ports at up to 4 Mbps each
One full-duplex port at up to E2 speeds (8 Mbps)
Electrical interfaces (selectable via cable selection)
V.35
EIA/TIA-232
EIA/TIA-449
EIA-530
X.21
Connectors and cables
V.35: DTE
34-pin Winchester-type male
CAB-V35MT (=)
V.35: DCE
34-pin Winchester-type female
CAB-V35FC (=)
V.35: DTE
Male DB-34 shielded male
CAB-V35MTS (=)
EIA/TIA-232: DTE
data bus (DB)-25 male
CAB-232MT (=)
EIA/TIA-232: DCE
DB-25 female
CAB-232FC (=)
EIA/TIA-449: DTE
37-pin D-shell male
CAB-449MT (=)
EIA/TIA-449: DCE
37-pin D-shell female
CAB-449C (=)
X.21: DTE
DB-15 male
CAB-X21MT (=)
X.21: DCE
DB-25 female
CAB-X21FC (=)
Environmental
Operating temperature from 10éC to40éC
Humidity from 10to90%, non-condensing
Regulatory
FCC Class Limits (FCC 47 CFR Part 15 Subpart B)
EN55022 Class Limits
UL 1950 D3 Dev.
CSA 22.2 Nos. 950
TUV-IEC 950