Cool-Icam cic-221 ユーザーズマニュアル

19

Effective Distance:  3.3 - 8.2 feet 

Depth underwater:  98 feet (Maximum)

•  Batteries should be replaced by an adult.

•  Do not mix different types of batteries or new and used batteries.

•  Use recommended or equivalent type of batteries only. 

•  Insert the batteries with the correct polarity.

•  Remove exhausted batteries from the camera immediately.

•  Do not short the supply terminals.

•  Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel- 

  cadmium) batteries.

•  Do not dispose the batteries in fire.

•  Remove batteries from the camera when not in use.

•  Rechargeable batteries are not recommended.

  These instructions should be retained for future reference.

Your Camera should only be operated within the following environmental conditions; 

• 41 - 104º Fahrenheit;  5 - 40º Celsius

• 20% - 85% relative humidity, non condensing

Battery life or image quality may be affected outside these conditions

• NEVER immerse any part of the Camera or its accessories into any fluid or liquid.

• ALWAYS disconnect the Camera from your PC before cleaning it.

• ALWAYS remove dust or stains with a soft cloth dampened with water or neutral detergent.

• NEVER place hot items on the surface of the Camera.

• NEVER attempt to open or disassemble Camera as this will affect any warranty claim. 

  Safety

•  Do not use the waterproof case in place of a personal floatation device (life jacket).

•  Do not use the waterproof case at water depths exceeding 98 feet.  The case may malfunction, suffer 

damage or leak.

•  When cleaning the case, do not spray water at it under pressure.  This may cause leaks.

•  Do not disassemble or modify the waterproof case.  This may cause leaks.

•  Do not damage the waterproof seal, scratch its contact surfaces, or allow dirt to accumulate between the 

waterproof seal and the case.  This may cause leaks.

•  Do not use the waterproof case in water at temperatures above 40ºC (104ºF).  Heat may warp it or 

cause leaks.

•  Do not leave the waterproof case in direct sunlight, inside a car in hot weather, or near a heater.  Heat 

may warp the casing and cause leaks.  Cover it with a towel, for example, if you have to leave it in the 

sun.

•  Do not drop or throw the waterproof case.

•  Avoid opening or closing the waterproof case near water.

•  Avoid using the waterproof case for long period  of time in hot temperatures.

•  Moving the waterproof case rapidly between hot and cold temperatures may cause condensation (water 

droplets)  to  form  on  its  external  and  internal  surfaces.    Condensation  may  cause  malfunctions.    You 

can avoid this by placing the waterproof case in airtight plastic bag and letting it adjust to temperature 

changes  slowly  before  removing  it  from  the  bag.    Stop  using  the  camera  immediately  if  you  detect 

condensation, wipe off the condensation from the waterproof case and the camera with a soft, dry cloth, 

and wait until the moisture evaporates completely before resuming use.

•  After you use the waterproof case, be sure to remove the AQ 1300 from it.  If you leave the waterproof 

case with the AQ 1300 still inside in direct sunlight or in a high-tempature place, this may cause a fire 

or bursting.

•  After use, be sure to dry all water from the waterproof case completely.

•  Remove any salt, dirt, sand, or other particles from the waterproof case, and wash it with clean, running 

tap water.  Keep the waterproof case locked while washing it.