Cool-Icam cic-221 ユーザーズマニュアル

5

•  Never use manganese batteries. 

•  Battery life differs greatly by manufacturers. 

•  Battery life is greatly affected by how much you use the flash, Operation LCD and other functions, and 

how long you leave the power turned on.

•  To prolong battery life, use the Flash button to turn off the flash whenever you are not using it.

For more guidelines on battery usage, see Using Your Batteries.

2 x AA Alkaline batteries are supplied with the product.  Follow the procedure below for installing batteries. 

Make  sure  the  batteries  are  placed  correctly  in  their  positive  (+/-)  negative  position.    See  instructions 

marked in the battery compartment.

1. Open the camera battery door by  sliding  the lock  upward and pushing  the battery door outwards as 

illustrated.

2. Insert the batteries as shown, ensuring you follow the +/- polarity correctly.

3. Close the battery door.

To turn on the camera, fully press and hold the Power button until the Operation LED turns red.  Press and 

hold the Power button again, a high beep sounds and the camera will be off. The Operation LED stays on 

when the camera is turned on.