DataCard SD260 ユーザーガイド
190
How-To Topics
1.
Obtain the IP Address, Subnet Mask, and
Gateway Address for each printer before you
begin this procedure.
Gateway Address for each printer before you
begin this procedure.
2.
Begin with the printer “Ready”. The U
SER
button glows steady green.
3.
Press the U
SER
button to display
“Suspended” on Line 1 and Menu available
on Line 2.
on Line 2.
4.
Press the E
NTER
key to enter the menu
system.
“Main Menu” appears on Line 1 and
“Maintenance” is shown on Line 2
“Maintenance” is shown on Line 2
5.
Press the down arrow key to scroll to the
Configuration menu.
Configuration menu.
6.
Press the E
NTER
key when “Configuration”
appears on Line 2.
7.
Press the down arrow key until “DHCP/
Static IP” is displayed on Line 2.
Static IP” is displayed on Line 2.
8.
Press the E
NTER
key to enter the DHCP/
Static IP menu.
9.
Press an arrow key to scroll to display “Static
IP” on Line 2.
IP” on Line 2.
10.
Press the E
NTER
key to apply the setting.
“Configuration” will be displayed on Line 1
and “DCHP/Static IP” is displayed on Line 2.
and “DCHP/Static IP” is displayed on Line 2.
11.
Press the down arrow key to display
“Network” on Line 2.
“Network” on Line 2.
12.
Press the E
NTER
key and “Network” is displayed on Line 1 and “IP Address”
on Line 2.
13.
Press E
NTER
and the IP address appears on Line 2.