DataCard SD260 ユーザーガイド
18
Install the Printer
2.
Remove the print ribbon cartridge.
3.
Load a full roll of print ribbon onto the
spindle closest to the cartridge handle.
spindle closest to the cartridge handle.
4.
Place the empty spool on the spindle
with the black gear.
with the black gear.
5.
Wind the empty spool counter-
clockwise one full turn.
clockwise one full turn.
Load Cleaning Roller
Load a new cleaning roller with each
new roll of print ribbon.
new roll of print ribbon.
The printer ships with the cleaning
roller spindle installed on the print
ribbon cartridge.
roller spindle installed on the print
ribbon cartridge.
1.
Remove the cleaning roller spindle
from the ribbon cartridge and slide
the continuous cleaning sleeve
onto the spindle (a).
from the ribbon cartridge and slide
the continuous cleaning sleeve
onto the spindle (a).
2.
Snap the spindle with sleeve installed back onto the ribbon cartridge (b).
3.
Remove the protective wrapper from the cleaning sleeve (c).