Plustek ps282 ユーザーガイド

  DO NOT load more than 50 sheets of paper (70 

g/m

2

, 18 lb.) to the ADF. 

  Paper scanned from the ADF must be a 

minimum of 5.08 x 5.08 cm (2” x 2”, W x L). 

  Make sure there are no gaps between the 

document stack and the paper-width slider; 

otherwise, the scanned images can be skewed. 

  Although the documents should be loaded firmly 

in place ensuring optimum scanning accuracy, 

they should never be wedged in so tightly that 

the process of feeding them through the 

scanner is strained. 

  Do not load additional paper into the ADF while 

the unit is feeding and scanning. 

1.  Load the business cards, headfirst and face down, toward the center of the 

ADF and all the way into the ADF until touching the bottom.    

For single-sided scans, load the business cards face down.   

For double-sided scans, load the business cards in desired order. 

 

2.  Adjust the paper width slider to the business card width.  The paper width 

slider should be gently touching both sides of the business cards.   

 

  Don’t load more than 20 business cards in one 

batch. 

 

18