Konica Minolta 1680mf ユーザーガイド
Scanning With the Machine
6-8
Scanning With the Machine
The machine keys can be used to make scans. Scanning is performed with
the scan settings specified in LinkMagic. To change the scan settings, change
the settings in LinkMagic.
In order to perform this operation, the following requirements must be met.
the scan settings specified in LinkMagic. To change the scan settings, change
the settings in LinkMagic.
In order to perform this operation, the following requirements must be met.
z
This machine is connected to a computer using a USB cable.
z
The TWAIN scanner driver, the printer driver and LinkMagic (Windows
only) are installed on the computer.
only) are installed on the computer.
z
Either LinkMagic is activated or the LinkMagic icon appears in the
Windows notification area.
Windows notification area.
The scan data is saved in the folder specified with LinkMagic.
For details on LinkMagic, refer to the Reference Guide on the Documentation
CD/DVD.
For details on LinkMagic, refer to the Reference Guide on the Documentation
CD/DVD.
"
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
is not lit up in green, press the Scan key to enter Scan mode.
Basic Scanning Operation
1
Position the document to be
scanned.
scanned.
"
2
Press the Scan key to enter
Scan mode.
Scan mode.
3
To scan color scans, press the Start-Color key. To scan monochrome
scans, press the Start-B&W key.
scans, press the Start-B&W key.
"
If the Stop/Reset key is pressed while scanning,
JOB CANCEL
appears. To continue scanning, select
NO
. To stop scanning,
select
YES
.