TRUE tdd-2-s 仕様ガイド
STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right
Plan
3D
PLAN VIEW
KCL
TDD-2-S TFHY03E
TFHY03S
TFHY03P
TFHY033
Direct Draw Beer Dispenser:
Stainless Steel Solid Door
TDD-2-S
DESIGN
• True’s direct draw beer dispensers
are designed with enduring quality
and value. Our commitment to using
the highest quality materials and
oversized refrigeration assures colder
product temperatures and years of
trouble free service.
and value. Our commitment to using
the highest quality materials and
oversized refrigeration assures colder
product temperatures and years of
trouble free service.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C).
and large condenser; maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C).
• Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger
fan blades give True beer dispensers
a more effi cient low velocity, high
volume airfl ow design. This unique
design ensures faster temperature
pull down of warm product, colder
holding temperatures and faster
recovery in high use situations.
fan blades give True beer dispensers
a more effi cient low velocity, high
volume airfl ow design. This unique
design ensures faster temperature
pull down of warm product, colder
holding temperatures and faster
recovery in high use situations.
• Condensing unit accessed from behind
front grill, slides out for easy cleaning
and maintenance.
and maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel doors, front
and sides. Matching aluminum back.
All stainless steel counter top.
All stainless steel counter top.
• Interior - 300 series stainless steel fl oor
with
1
/
2
" (13 mm) reinforced lip and
heavy gauge galvanized steel walls.
• Insulation - entire cabinet structure
and solid doors are foamed-in-
place using high density, CFC free,
polyurethane insulation.
place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized base
rail dipped in rust inhibiting enamel
paint for corrosion protection inside
and out.
paint for corrosion protection inside
and out.
• Two (2) 3" (77 mm) diameter stainless
steel insulated beer columns. Cold
air is directed into beer columns to
reduce foaming and maximize draft
beer profi ts.
air is directed into beer columns to
reduce foaming and maximize draft
beer profi ts.
DOORS
• Stainless steel exterior with heavy
gauge galvanized steel liner.
• Each door fi tted with 12" (305 mm)
long recessed handle that is foamed-
in-place with a sheet metal interlock
to ensure permanent attachment.
in-place with a sheet metal interlock
to ensure permanent attachment.
• Positive seal doors.
• Magnetic door gaskets of one piece
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
for ease of cleaning.
• Door locks standard.
LIGHTING
• Incandescent interior lighting.
MODEL FEATURES
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
• Convenient
1
/
2
" (13 mm) barbed T drain
fi tting located on front of cooler.
• Designed to accommodate all types of
beer kegs.
• Listed under NSF-7 for the storage
and/or display of packaged or bottled
product.
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for fi nal connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
❒ 2
1
/
2
" (64 mm) diameter castors.
❒ 4" (102 mm) diameter castors.
❒ Double headed draft column.
❒ Two-way tapper manifold.
❒ Three-way tapper manifold.
❒ Draft cap.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A epansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
standard with 404A epansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
115/60/1
NEMA-5-15R
NEMA-5-15R
ELEVATION
PLAN VIEW
37"
(940 mm)
3"
(77 mm)
27
1
/
16
"
(688 mm)
11
7
/
32
"
(285 mm)
52
1
/
4
"
(1328 mm)
58
13
/
16
"
(1494 mm)
15
1
/
4
"
(388 mm)
48
27
/
32
"
(1241 mm)
21
25
/
32
"
(554 mm)
13"
(331 mm)
22
29
/
32
"
(582 mm)
1
/
2
"(13 mm)
Barbed T
Drain Fitting
3
7
/
8
"
99 mm
23
3
/
16
"
(589 mm)
57"
(1448 mm)
22
29
/
32
"
(582 mm)
15
/
16
"
24 mm
1
31
/
32
"
(50 mm)
17
5
/
32
"
(436 mm)
20
21
/
32
"
(525 mm)
17
5
/
32
"
(436 mm)
20
21
/
32
"
(525 mm)
13
19
/
32
"
(346 mm)
8
31
/
32
"
(228 mm)
49
27
/
32
"
(1267 mm)
1"
(26 mm)