Hitachi DZ-GX5000A オーナーマニュアル

ページ / 158
English
133
Error occurred. Please 
replace disc or format 
disc.
• Abnormality has occurred with the DVD-RAM/DVD-RW/+RW 
disc to be repaired. Initialize the disc before using it, or use the 
another disc. Initializing the disc will erase all data on it.
• See *2 on page 134.
97
Error occurred. Please 
replace disc.
An abnormality occurred with a DVD-R disc to be repaired. 
Replace the disc.
Finalize may not be 
complete. Finalize again 
now?
This message will appear when power is supplied again and the 
disc is reinserted after power was shut off during finalization due 
to a power failure, etc. Choose “YES” if you wish to be sure 
finalizing is performed.
100
JPEG file related to 
scenes are not found.
This message will appear when stills recorded on DVD-RAM disc 
using a device other than this DVD video camera/recorder are to 
be copied to card.
NO DISC
This message may appear when the DVD video camera/recorder 
or disc is moved from a cold place to a warm place.
Condensation has occurred on the camera/recorder lens or DVD 
drive. Do not remove the disc; leave the DVD video camera/
recorder turned off in a place as dry as possible for 1 – 2 hours.
6
The disc has not been inserted.
Insert it.
36
The disc is not inserted correctly.
Push the disc against the turntable at the center until a click is 
heard.
See *3 and *4 on page 135.
36
Is the disc surface/bottom reversed?
Check the surface/bottom of disc, and reinsert it correctly.
36, 37
No more scenes. 
PlayList was deleted.
• All scenes are deleted from the play list.
• Since a play list with no scenes cannot be supported by 
specifications, a play list from which all registered scenes have 
been deselected will be deleted.
93, 94
PlayLists over limit.
An attempt was made to create new play list or copy play list, 
even though limit specified for play lists in the video recording 
standard had already been stored.
90
Same scenes on Play 
List will be deleted. 
Delete scenes?
• This will appear when scenes are to be deleted.
• When a play list exists on disc, an attempt to delete scenes in 
program will display this message. (This message will not 
appear if you deselect scenes from play list.)
77
Scenes over limit. 
Cannot add scenes.
The number of scenes entered in play list has reached the limit 
that can be entered.
Delete several scenes.
90, 94
Scenes over limit. 
Cannot divide scene.
The number of entered scenes has reached the limit that can be 
entered.
Delete several scenes.
90, 94
Stop processing.
The C button was pressed to stop processing of multiple scenes.
There was no scene 
which can be deleted.
This message will appear if you try to delete multiple scenes on 
Disc Navigation when all the selected scenes have been locked. 
Release the lock on scenes before executing deletion.
77, 84
Message
Cause & Troubleshooting
Reference 
page