Hitachi 42hdx62 オーナーマニュアル
13
Rear Panel Connections
First time use
1.
Press the MENU button on the Remote Control to
access the Main Menu screen.
access the Main Menu screen.
2.
Use the CURSOR PAD
to highlight SETUP in
the Main Menu and press the SELECT button.
3.
Use the CURSOR PAD
to highlight CableCARD
Information and press the SELECT button.
4.
To view the CableCARD ID and Host ID, use the
CURSOR PAD
CURSOR PAD
to highlight CableCARD Info and
press the SELECT button.
NOTE:
The Diagnostics Info. window is for
Service use only.
Service use only.
THINGS TO CHECK WHEN USING THE
CableCARD / CableCARD Services
CableCARD / CableCARD Services
1.
Check that the CableCARD is properly inserted in
the CableCARD slot.
the CableCARD slot.
2.
Remove the CableCARD by pressing the eject
button and pull the CableCARD straight out.
button and pull the CableCARD straight out.
3.
Visually inspect the CableCARD to ensure all pin-
holes are in good condition, with none blocked or
damaged.
holes are in good condition, with none blocked or
damaged.
4.
Make sure the CableCARD is re-inserted in the
correct direction, then slowly push until it is fully
seated in the slot.
correct direction, then slowly push until it is fully
seated in the slot.
5.
When the CableCARD is installed, note all screen
messages that appear (“CableCARD Installed”,
“Acquiring Data”, “CableCARD is not Installed”).
If the “CableCARD Installed” message does not
appear when card is installed, check the TV’s card
slot and CableCARD pins for obstructions or
damage.
messages that appear (“CableCARD Installed”,
“Acquiring Data”, “CableCARD is not Installed”).
If the “CableCARD Installed” message does not
appear when card is installed, check the TV’s card
slot and CableCARD pins for obstructions or
damage.
6.
If problems still remain, please contact your Cable
Service Provider.
Service Provider.
NOTES:
1.
When a CableCARD is installed, Auto
Channel scan will not be needed
because the channel list is automatically
loaded to the TV's channel memory.
Channel scan will not be needed
because the channel list is automatically
loaded to the TV's channel memory.
2. The TV will take several seconds to
detect and recognize the presence of the
CableCARD. This process must be
completed before any CableCARD
information or Channel listings is
accessed.
CableCARD. This process must be
completed before any CableCARD
information or Channel listings is
accessed.
Appendix E
After the CableCARD has been successfully installed, a
CableCARD Information menu appears in the SETUP
menu of the On-Screen Display.
Follow the instructions below to access the CableCARD
Information menu.
After the CableCARD has been successfully installed, a
CableCARD Information menu appears in the SETUP
menu of the On-Screen Display.
Follow the instructions below to access the CableCARD
Information menu.
Setup
Timers
Locks
TV Guide On Screen
Channel Manager
Audio
Video
Move
SEL
Select
Set The Inputs
Screen Saver
Set AV NET
Menu Preference
Set Monitor Out
Set Closed Captions
CableCARD Information
Setup
Upgrades
Set Stand-By Mode
Move
SEL
Select
CableCARD Information
Setup
Move
SEL
Return
Select the button below to acess
CableCARD ID and Host ID.
CableCARD ID and Host ID.
Select the button below to access
CableCARD and Host Diagnostics.
CableCARD and Host Diagnostics.
CableCARD Info.
Diagnostics Info.
In order to start cable service
for this device, please contact
your cable provider
CableCARD(tm): 123-456-789-1
Host: 123-456-789-1
Data: 123-456-789-1
Unit Address: 123-456-789-1
Press EXIT to return