Hitachi cmp4221u オーナーマニュアル
15
ENGLISH
INSTALLATION INSTRUCTIONS (continued)
Power Cord Connection
Connect the power cord, after completing all other connections.
c
Connect the power cord to this device.
d
Connect the power cord plug to the power outlet.
(The type of plug is different from this drawing for some countries.)
CAUTION
x Use only the power cord provided.
x Do not use a power supply voltage other than that indicated (AC100-240V, 50/60Hz) as this may cause fire or electric shock.
WARNING
Be cautious of the power cord connection.
Incorrect connection of the power cord could result in fire or electrical shock.
x Do not touch the power cord with a wet hand.
x Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug.
x Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.
x Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug.
x Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.
x Do not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate
extension lead or consult your dealer.
x Should you require replacing the fuse in the molded plug with a new fuse, and then please replace with new one of the same value, type and approval
as the original. Ensure the fuse cover is returned to its original position.