DataVideo dac-10 クイック設定ガイド
DAC-10 Quick Setup with Final Cut Pro 4 (HD)
This setup guide will cover four specific areas:
A. Explanation of the DAC-10 dip switches
B. Configuration
B. Configuration
of the dip switches
C. Diagrams of typical cable connections
D. Initial Software configuration
D. Initial Software configuration
A. Explanation of the DAC-10 Dip Switches
The DAC-10 has dip switches to customize the converter for your hardware and software.
The DAC-10 is sold throughout the world, so dip switch settings can be changed to
accommodate different regions and different firewire devices.
The diagram below explains what each dip switch controls within the DAC-10.
The DAC-10 is sold throughout the world, so dip switch settings can be changed to
accommodate different regions and different firewire devices.
The diagram below explains what each dip switch controls within the DAC-10.
B. Configuration of the Dip Switches
Your DAC-10 dip switches have been preset for use with Macintosh computers. Your dip
switches should be set as follows: