Hitachi VT-M190A ユーザーズマニュアル
ANTENNA/CABLE SYSTEM CONNECTIONS
23
TO MONITOR THE RECORDING
1. Turn on the TV, and set it to the same output channel as the editing VCR channel 3
or 4.
or 4.
2. Press VCR/TV button on the editing VCR so that VCR appears on the display.
USING A CABLE CONVERTER BOX
If your cable service supplies you with a cable converter box, you can use the basic
connection shown below.
connection shown below.
See Cable Converter Diagram.
NOTES:
With this connection, you CANNOT record one program and while viewing another.
Channel memory programming is NOT needed when using this connection.
Channel memory programming is NOT needed when using this connection.
TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED
CHANNEL.
CHANNEL.
1. Press VCR/TV button on the remote control so that "VCR" appears on the display.
2. Set the TV channel to the some video output channel as located on the back of the
VCR (Ch3 or 4).
VCR (Ch3 or 4).
3. Set the VCR channel selector to the output channel of the Cable Converter Box.
(Example: CH 3)
(Example: CH 3)
4. Select the channel to be recorded at the Cable Converter Box.