Canon icd480 ユーザーズマニュアル

Troubleshooting 

Error Messages

Paper jams have occurred in the machine. 
<LIFT PANEL TO OPEN/OPEN TONER COVER> 
appears alternately.

Clear the paper jam (See “Clearing Jams,” 
on p. 11-2) and reload paper in the paper 
cassette or multi-purpose tray. The cover 
must be opened and closed to resume the 
current job.

Paper jams have occurred in the machine. 
<LIFT PANEL TO OPEN/OPEN TONER COVER> 
appears alternately.

Clear the paper jam (See “Clearing Jams,” 
on p. 11-2) and reload paper in the paper 
cassette or multi-purpose tray. The cover 
must be opened and closed to resume the 
current job.

This message appears when turning on the 
main power switch, or when the machine is 
not ready for printing.

Wait until the message disappears.

Paper is loaded in the multi-purpose tray.

Remove the paper from the multi-purpose 
tray. The machine will not print faxes, reports, 
or lists when paper is loaded in the multi-
purpose tray. They will be stored in memory.

Paper is not loaded properly, or the toner 
cartridge is not set.

Load paper properly. (For instructions on how 
to load paper in the paper cassette or multi-
purpose tray, see “Loading Paper,” on p. 2-8.)
Set the toner cartridge in the machine (see 
“Set Up the Machine,” in the Starter Guide or 
“Set Up the Machine,” in the e-Manual).

A system error has occurred. <XXX> will be 
a three-digit code that indicates a particular 
type of error.

Turn OFF the main power switch, wait for 
more than 5 seconds, then turn it ON again. 
If the message persists, turn OFF the main 
power switch, disconnect the power cord, 
and contact Canon Customer Care Center.

The memory lock reception password or 
system password you entered is incorrect.

Enter the correct password. For details, see 
“Receiving Documents in Memory without 
Printing Out (Memory Lock Reception),” on 
p. 5-41 or “Security,” in the e-Manual.