Canon MP360 インストールガイド

Set-Up Sheet

Thank you for purchasing the Canon MultiPASS MP370/360. To prepare your
machine for use, please follow the instructions in this Set-Up Sheet before referring to
any other documentation.

READ THIS SHEET FIRST

Do not connect the USB cable until

, "Connect the USB

cable."

IMPORTANT

Setup procedures

Start

Setup flow

Setup procedures

End

This side explains the setup procedure for use without connecting to a computer. <Check packed contents, install and adjust machine>

This side explains the setup procedure for use by connecting to a computer. <Install MP Drivers and Utility Software>

You can use the copy, photo print (MP370) functions.

You can use the print, scan functions.

Connect power

cord

Install Utility Software

Install print head

Install MP Drivers

Install ink tanks

Connect USB cable

Load print media

Align print head

Unpack and install

the machine

Unpack and install the machine.

Carefully remove all items from the box.

NOTE

• When removing the machine from the

box, take sufficient care not to drop it.

Remove the protective material.

NOTE

• After removing the protective material,

do not lift the machine by grasping the
scan unit.

Hold the bottom side.

Place the machine on a flat surface.

• Be sure to hold the machine by the

sides. Set nothing in front of the
machine.

Remove all shipping tape from the
exterior of the machine.

• After removing the tape, remove the

protective sheet.

Do not grasp the
scan unit.

HT3-2142-000-V.1.0