Canon TX1 ユーザーガイド
32
You can shoot zoomed images using the combined digital and
optical zooms. The focal lengths (35mm film equivalent) and
characteristics are as follows.
optical zooms. The focal lengths (35mm film equivalent) and
characteristics are as follows.
1
(Rec.) Menu [IS Mode]
[Continuous]*/[Shoot
Only]/[Panning]/[Off].
See Menus and Settings (p. 22).
* Default setting.
z
It may not be possible to completely stabilize images when
shooting at low shutter speeds. Use a tripod to shoot under
these conditions.
shooting at low shutter speeds. Use a tripod to shoot under
these conditions.
z
If camera shake is too strong, it may not be fully corrected.
z
Hold the camera vertically while panning (stabilization
does not work when the camera is held horizontally).
does not work when the camera is held horizontally).
z
If you have selected [Shoot Only] or [Panning] and then
shoot a movie, the setting will change to [Continuous].
shoot a movie, the setting will change to [Continuous].
Using the Digital Zoom/
Digital Tele-Converter
Shooting Mode
Option
Focal Length
Characteristics
Standard
39 – 1560 mm
You can shoot at a maximum zoom factor
of approximately 40x using a combination
of the optical and digital zoom features.
of approximately 40x using a combination
of the optical and digital zoom features.
Off
39 – 390 mm Shoots without using the digital zoom.
1.5x
58.5 — 585 mm
Digital zoom is fixed at the selected zoom
factor, and the focal length shifts to
maximum telephoto. This enables a
faster shutter speed and less chance of
camera shake than a shot taken at the
same angle of view with [Standard] or
[Off].
factor, and the focal length shifts to
maximum telephoto. This enables a
faster shutter speed and less chance of
camera shake than a shot taken at the
same angle of view with [Standard] or
[Off].
1.9x
74.1 — 741 mm
This function cannot be set when Aspect Ratio is set to
[16:9].
[16:9].